Wings
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjl4z2E7UZsX9X7YgHgmkXk4-5gs5SctzqeC0OkL03sCKUj2fzXVNaAitXCqL_dAKGZNUUn84xGMD7DfZDfMooQ_bjw8kFF8Uqr2PBVJkGxHrSfai3TU7tNpGbjFWeKv9uCbpSMdQ/s320/100_1346.jpg)
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh0LVjv4w3Q1_T06J1AzmeVyHnit-EgOtg20S7c_aCeNfrYAsR_UUl0jlZ4H4J03gHJJjYyoJHf9d7SjkQSABkoAlKUqXHM4u7bRbBEV80Z82z2_Bn5hD0rhUmiSw6BiGctHQaDhg/s320/100_1347.jpg)
I got busy on the other wing today and got all the holes drilled for the conduit in about 2 hours. Then I had to deburr all the holes to smooth them up in both wings and then wrestled the conduit into the wings. I thought the conduit would be easier to get through the holes, but it was quite a task. Once I got that part done I tapped the holes for the tie-down rings in both wings with a 3/8 - 16 tap.
5 Hours
Wings - 39 hours
Empennage - 195 hours
Total hours on project - 234
<< Home