Empennage

I got out in the garage about 10:00 this morning to try and beat the heat, but it didn't work out that way too well. I got busy and did the final drilling for all the holes in the skin for the right side of the horizontal stabilizer. Once I got that done I had to disassemble all the parts and make sure they were all marked so I can get them back in the same place. The rest of the afternoon was spent deburring the holes on all the spars and ribs and making sure the edges were really smooth. It got hot again and I saw over 103 degrees before a cold front came through and it dropped back to 101.

5 Hours