Empennage
![](http://photos1.blogger.com/blogger/3722/2980/320/100_0755.jpg)
![](http://photos1.blogger.com/blogger/3722/2980/320/100_0752.jpg)
![](http://photos1.blogger.com/blogger/3722/2980/320/100_0754.jpg)
I started today by building the bending tool that helps make the trailing edge bend for the elevators. Basically that was just attaching two 2x8's together with a few door hinges. Once that was done I did the bend on both the left and right elevators. I taped the 3/16" dowel rod in the radius of the bend to help keep it smooth and then just applied pressure on the elevator in the bending tool. I thought it might require some finesse but it turned out that I just bent it as far as I could to achieve the proper bend. After I finished I used a straight edge to see if it had any bulges, but it appears to be smooth and proper.
1 hour
Total hours on project = 122
<< Home