Wings
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjADOMqRVxfDp_Yh_xHVqGwtaIVJns7OrT9OAWGorYDf8_5IZzQVQOa1KlFw_3AMaJ-R7b0UPQK_obKbPmAmZuAST5WaguV-mILIsf3hWYnUDcPoP-Ye7QHXvaow7zQo7uwBAxekQ/s320/100_1451.jpg)
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhxQh5H20d7f2qKq8vY9Zj8dFyM-dsDUNzmyt6buegmXHOq8Iss52zXzm36MKkYVRWUa9jLa82HXR2aT4bgoidcZgQS2xDC_NjuepEiWsK-O0oYoJiqWdUoE7vdrnkyWRuKqjdDxA/s320/100_1452.jpg)
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi5jNVBoU8sQgnTez1jNpWLBjVaSaGqFfGCobWlalFcwcuIIuB8BxyJruA-wRPGDvx3m5TLKSuNoef8Hj9a3yMv8tB8WsP2ywIyFR7zP_W73osnpckBvvKjWjwZEO297hsYC5pXCw/s320/100_1454.jpg)
I managed to find a couple of hours this afternoon, before the 'honey-do's' got in the way, to work on the RV project. I continued to work on the Gretz Aero Pitot mount. The first step was to use some aluminum angle as a support brace and measure it to fit. Once I got that in place I was able to take the Gretz backing plate and drill the mount holes, both to the wing spar and the angle brace that I had riveted in place to one of the ribs. Next step will be to cleco the wing skin back on and drill the holes in it for the backing plate.
2 Hours
Wings - 70 Hours
Empennage - 195 hours
Total hours on project - 265
<< Home